Welcome To GDS Corp
High quality gas detection is a critical factor in the safe operation of your company and protection of your staff and clients. At GDS Corp, we understand the importance of reliable, cost-effective gas detection systems and specialize in solutions for the most challenging work environments.
- GASMAX CX Gas Monitor
- C64 Protector Alarm Controller
- GASMAX TX Wireless Gas Monitor
- GDS-58NXP Sample Draw Monitor
- Odorant Monitors
- Sample Draw Monitors
- Open Path Gas Detectors
- Wireless Gas Detection Systems
- Gas Detectors and Monitors
- Gas Sensors
- Alarm Controllers
- Flame Detectors
- Power Systems
- Calibration Supplies
Odorant Monitors sample the level of hydrogen sulfide or mercaptan-based odorants in streams of natural gas. Maintaining an acceptable level of odorant is critical to the safe operation of natural gas distribution systems.
Sample Draw Monitors
In some enclosed applications, installing a gas sensor is impractical, dangerous, or creates a calibration nightmare. Sample Draw Monitors solve this problem by pulling a continuous sample of gas into the monitor using a long-life sample pump.
Open Path Gas Detectors
Open Path Gas Detectors use high intensity infrared light to detect the presence of hydrocarbon gases that pass between the transmitter and receiver. When used in conjunction with fixed monitors, Open Path detectors can provide an extra level of safety for fence lines and other linear boundaries.
Wireless Gas Detection Systems
Wireless Gas Detection Systems are extremely useful when gas monitors need to be installed in temporary locations or when the cost or complexity of running wiring conduit is unacceptable. GASMAX TX wireless gas monitors can operate with both new C2/TX controller/receivers and existing legacy alarm controllers.
Gas Detectors and Monitors
Gas Monitors are designed to detect the presence of toxic or combustible gases in ambient air. Designed to be installed in fixed locations, these devices provide critical early-warning alarms in case of leaks or chemical spills.
Gas Sensors detect specific gases and can reduce initial system cost when no local display is needed for safe operation.
Alarm and Display Controllers are often used to monitor and manage gas detectors, flame detectors, and other related sensors in a complete gas monitoring system. The controller powers the sensors, displays the readings and activates common alarms if the measured gas level exceeds user-programmable levels.
Flame Detectors are designed to send an alarm if any open flame is detected in an industrial environment. Flame detectors monitor infrared and ultraviolet wavelengths and use sophisticated signal processing techniques to minimize false alarms.
Gas detection systems operated at peak effectiveness when provided with a source of reliable, low-noise DC power. Selection of the proper Uninterruptible Power Supply (UPS) or Solar Power System is critical for gas detection systems operated in remote or noisy environments.
Periodic calibration is critical to the continued safe operation of any gas detection system. GDS Corp offers calibration kits, reference gas cylinders and calibration gas generators for all applications.