 |
Controllers
|
GDS Corp Display and Alarm Controllers provide a convenient and reliable way to monitor multiple gas and flame detectors. Built-in two point calibration, fault monitoring, multiple alarm levels, programmable relays and MODBUS or Ethernet interfaces deliver outstanding value and reliability in industrial applications. Most controllers are CSA certified for use in Class I Division 2 Hazardous Areas.
|
 |
|
|
Flexible modular design. Input analog, direct bridge, MODBUS or wireless. Relay, 4-20mA and MODBUS output. Multiple alarm setpoints per channel. Ethernet option. NRTL certified for Div. 2 hazardous areas and C22.2 No. 152 for LEL combustibles |
|
|
|
 |
|
|
Flexible modular design. Input analog, toxic or direct bridge sensor. Relay, 4-20mA and MODBUS output. Multiple alarm setpoints per channel. Ethernet option. NRTL certified for Div. 2 hazardous areas and C22.2 No. 152 for LEL combustibles |
|
|
|
 |
|
|
Remote display for C1 Protector controllers. View one controller's data in realtime across an Ethernet network while monitoring and recording data from up to nine more |
|
|
|
 |
|
|
Visualization and data logging software for Gas Detection and Monitoring Applications. Windows-based. Supports up to 10 C1, C2 or C2 Quad controllers. |
|
|
|
|
|
|
|
Flexible modular design. Input analog or direct bridge sensor. Relay, 4-20mA and MODBUS output. Multiple alarm setpoints per channel. Ethernet interface option. NRTL certified for Div. 2 potentially hazardous areas and C22.2 No. 152 for LEL combustibles |
|
|
|
|
|
|
